Foxtrot

UF iDataPlex User Manual

• foxtrot.futuregrid.org

ssh username@foxtrot.futuregrid.org

where username is your FutureGrid username. You must have an account on FutureGrid.

2x IBM x3650 M2 management nodes (fm1, fm2):

• 2 x 4-Core Intel Xeon E5530 (Nehalem-EP) processors
• 24GB Main Memory
• 2 x 146GB 2.5-Inch 6Gbps SAS Disks

32x IBM iDataPlex dx360 M2 nodes (f1 through f2):

• 2 x 4-Core Intel Xeon E5520 (Nehalem-EP) processors
• 24GB Main Memory
• 1 x 500GB 3.5-Inch SATA Disk

1x Dell PowerEdge R310 Network monitoring node (bwctl.ufl.net.futuregrid.org)

Hardware: IBM iDataPlex dx360 M3 storage node with 24TB raw capacity (fs1).

• 2 x 4-Core Intel Xeon E5520 (Nehalem-EP) processors
• 24GB Main Memory
• 12 x 2TB 7200 rpm 3.5-Inch 6Gbps SAS Disks

Capacity: 20TB RAID5

Storage Interconnect: NFS export over GigE.

Filesystem Type: XFS

Filesystem Layout:

• Home directories mounted to all foxtrot nodes (f1 thorugh f32) at /N/u/<username>
• Backup is not provided

Hardware

• Force10 S50 48-port GigE switch, with 10GigE uplink to Florida LambdaRail
• BLADE Rackswitch 48-port GigE switch (Management Network)

Nimbus

• Refer to Nimbus manual.

About